Door Repair Toronto Tips That Will Save You Time and Money
Canada, Home & Garden, North America Door Repair, Door Repair Service Toronto, Door Repair TorontoXpress Door Repair Toronto Tips That Will Save You Time and Money in Toronto Ontario
If you have a door problem like lots of homeowners out there, then it is apparent you know that nothing can be annoying like doors that won’t latch, open or shut properly.
After all, your doors are supposed to protect you and your family in addition to keeping everything that is in your house safe from burglars. Knowing how to repair your doors can save you time and money in the long-run.
The good news is that repairing your doors isn’t that complicated. It is a task you can handle provided you are well acquainted with door repair. But if you don’t have any idea on how to repair your doors, here are a couple of door repair tips from Door Repair Toronto that are worth your read, especially if you are having problems with your doors.
1. Diagnose the problem first
A variety of issues occur with doors and hence it is important to diagnose the problem with your door even before you think of doing the necessary repairs. Again, different door problems require different fixes. For instance, if you have doors that bind or rub against the jamb, then you should identify the spots where they bind simply by sliding a thin piece of cardboard between the jambs and the doors. Thereafter, you can mark the spots where the doors are binding using a pencil. Again, if you are having loose doors, then it means that the door stops or strike plates aren’t tight enough and thus you should embark on repairing the strike plates by removing the flange in the center in order to tighten the fit. In other words, diagnose the problem with your doors first and then embark on the necessary repairs. The good news is that you only need to do a quick inspection in order to diagnose the problem with your doors.
2. Have your tools and materials handy
Once you have diagnosed the problem with your doors or door, then it is time to do the necessary repairs. Since this is something that you can do with your bare hands, you need to have your tools handy. Some of the tools that you need to have when repairing your doors include a screwdriver and a hammer. Again, you need different door repair materials depending on the door problem that you are looking forward to fixing. If for instance your hollow-core door has a hole in it, you need to get a spray foam insulation that you can use to fill the hole. Moreover, if you are fixing doors that bind or rub against the jamb, then you may be required to invest in a new pair of hinges.
3. Fix the problem
After gathering all the necessary tools and materials, you can now embark on fixing the door problem you are faced with. If you want to fix a loose door for instance, you need to remove the door plate and then bend the flange using a pair of pliers in order to tighten the fit. If your hollow-core door has a hole, you simply need to fill the hole using spray foam insulation and then leave it to dry overnight. Thereafter, you can slice off the excess spray foam insulation using a razor blade and then sand the area lightly using fine sand paper.
4. Test the door
After carrying out the necessary fixes, you need to test your door to see whether it can open and close properly. If you were fixing your loose door for instance, you need to test it so that you can determine whether the door is working properly or not.
With these door repair tips right at your fingertips, then it is apparent you are going to repair almost any door problem that you could be having. But if you are unable to fix your door problem, then it is imperative you call in a door repair Toronto expert to assist you with fixing your door.